SAN-TITAN: Optional fine filtration down to 0.2 microns.
We are happy to go one step further.
- Passive filter systems present a particular challenge: the finer the filter pores, the more difficult it becomes to maintain sufficient water flow. The crucial factor is therefore the right balance between filtration fineness, filter surface area and water flow – not just on the first day, but also after months of real-world use.
It took many tests, different approaches and a few costly missteps before we developed a solution with SAN-TITAN that met our exacting standards.
This led to the optional SAN-TITAN – for people who want to take fine filtration one step further.
After the SAN-MAXI, the water passes through an additional filter made from titanium Its mechanical filtration rating is 0.2 µm – equivalent to 200 nanometres. This provides additional retention of correspondingly small undissolved particles.
But here too, another question was crucial for us: sustainability.
Why should a high-quality titanium filter simply end up as waste one day?
SAN-TITAN: Backwash. Clean. Reuse.
SAN-TITAN is also backwashable. Regular backwashing flushes retained particles out of the titanium filter. This reduces the cleaning effort and can extend the intervals between necessary deep cleans.
Only when more intensive cleaning is required is the titanium filter removed, cleaned with ultrasound and refitted. It therefore does not need to be replaced with a new filter at every maintenance interval.
Its intended service life depends on the quality of the incoming water and the specific operating conditions, and is around ten years.
*Ultrasonic cleaning can be carried out by our technicians. Alternatively, you can do it yourself using a suitable ultrasonic cleaning device with minimum internal dimensions of 300 × 120 × 120 mm.
